D-Link DWS-4000 Series, Cli Command Reference

Page: 276 / 566

D-Link Unified Switch CLI Command Reference
268
© 2009 D-Link Corporation. All Rights Reserved
no rf-scan sentry
The
no
version of this command disables dedicated scanning and enables normal operation of the radio.
rf-scan duration
This command configures the RF scan duration for the radio. The duration indicates how long the radio will scan on one
channel.
no rf-scan duration
The
no
version of this command returns the configured RF scan duration to its default value.
station-isolation
This command enables the Station Isolation mode on the radio. When Station Isolation is enabled, the access point blocks
communication between wireless clients. The access point still allows data traffic between its wireless clients and wired
devices on the network, but not among wireless clients.
Default • Disabled
• Channels, all
Format
rf-scan sentry [channels {a | bg | all}]
Mode AP Profile Radio Config
Parameter Description
channels Indicates to scan channels within specified mode/frequency.
a Perform RF scan on all 802.11a channels (5 GHz frequency).
bg Perform RF scan on all 802.11b/g channels (2.4 GHz frequency).
all Perform RF scan on all channels.
Format
no rf-scan sentry
Mode AP Profile Radio Config
Default 10 milliseconds
Format
rf-scan duration <10-2000>
Mode AP Profile Radio Config
Parameter Description
10-2000 Time duration in milliseconds.
Format
no rf-scan duration
Mode AP Profile Radio Config