Cisco BPX 8650, Installation And Configuration Manual

Page: 482 / 606

27-12
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 27 Alarms and Statistics
Event Logging
Event Logging
All trunk log events are modified to display the virtual trunk number. The examples in Table 27-6 and
Table 27-7 show the log messaging for activating and adding a virtual trunk 1.2.1.
Error Messages
The following are the added error messages for virtual trunks:
VBR Cells Dropped X X
ABR Cells Dropped X X
Table 27-5 Physical and Logical Trunk Alarms (continued)
Alarm Type
Physical
Logical Statistical Integrated T1 E1 T3 E3 SONET
Table 27-6 IGX Log Messaging for Activating and Adding a VT
Class Description
Info NodeB at other end of TRK 1.2.1
Clear TRK 1.2 OK
Major TRK 1.2 Loss of Sig (RED)
Clear TRK 1.2.1 Activated
Table 27-7 BPX Log Messaging for Activating and Adding a VT
Class Description
Info NodeB at other end of TRK 1.2.1
Clear TRK 1.2.1 OK
Major TRK 1.2.1 Loss of Sig (RED)
Clear TRK 1.2.1 Activated
Message Description
“Port does not support virtual trunking” Port is not configured for virtual trunks
“Port configured for virtual trunking” Port is not configured for a physical trunk
“Invalid virtual trunk number” Virtual trunk number is invalid
“Maximum trunks per node has been reached” Trunk limit per node has been reached
“Invalid virtual trunk VPI” Virtual trunk VPI is invalid
“Invalid virtual trunk traffic class” Virtual trunk traffic class is invalid
“Invalid virtual trunk VPC type” Virtual trunk VPC type is invalid
“Invalid virtual trunk conid capacity” Virtual trunk conid capacity is invalid