Cisco BPX 8650, Installation And Configuration Manual

Page: 279 / 606

17-5
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 17 Initial BPX 8600 Node Configuration
Summary of Commands
Figure 17-3 Configuring the Node Interface for a Local Control Terminal
Figure 17-4 Removing a Node From the Network
Figure 17-5 Add an Interface Shelf to the Network
Summary of Commands
A description of each node command is described in Table 17-1.
Log on to
a node
Local or
remote?
:Set-up trunks CNFTERM CNFTERMFUNC WINDOW
Another
node?
Local
Remote
Yes
No
VT
S5299
Log on to
a node
Local or
remote?
End
DELTRK
(see chapter 4 for more information)
Another
node?
Local
Remote
Yes
No
VT
S5300
Log on to
a node
Local or
remote?
End
Another
node?
Local
Remote
Yes
No
VT
S5301
ADDSHELF
Table 17-1 Commands for Setting Up a Node
Name Description
addalmslot Adds an alarm slot.
addcdred Adds card redundancy for SONET APS 1+1 across two BXM cards.
addctrlr Adds a PNNI VSI controller to a BPX node through an AAL5 interface shelf.
addshelf Adds a trunk between an IGX or BPX core switch shelf and an interface shelf.
addyred Adds Y-cable redundancy.
cnfasm Configures an ASM card.
cnfdate Configures the date.
cnffunc Configures the system function.
cnfname Configures the node name.