Cisco BPX 8650, Installation And Configuration Manual

Page: 413 / 606

23-33
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 23 Configuring BXM Virtual Switch Interface
Class of Service Templates and Qbins
The connection parameters and their default values for label switching service templates are listed in
Table 23-12.
CoS Max BW 100 100 100 100 100 100
Scaling Class * * * * * *
CAC Treatment ID * * * * * *
VC Max Threshold * * * * * *
VC CLPhi Threshold * * * * * *
VC CLPlo Threshold * * * * * *
VC EPD Threshold * * * * * *
VC EFCI Threshold * * * * * *
VC discard selection * * * * * *
Table 23-11 ATM Forum VBR Service Types (continued)
Parameter Vbrrt.1 Vbrrt.2 Vbrrt.3 Vbrnrt.1 Vbrnrt.2 Vbrnrt.3
* indicates not applicable
Table 23-12 MPLS Service Types
Parameter CoS 0/4 CoS 1/5 CoS 2/6 CoS3/7 Tag-ABR
Qbin # 10 11 12 13 14
UPC Enable 0 0 0 0 0
UPC CLP Selection 0 0 0 0 0
Policing Action (GCRA #1) 0 0 0 0 0
Policing Action (GCRA#2) 0 0 0 0 0
PCR - - - - cr/10
MCR - - - - 0
SCR - - - - P_max
ICR - - - - 100
MBS - - - - -
CoS Min BW 0 0 0 0 0
CoS Max BW 0 0 0 0 100
Scaling Class 3 3 2 1 2
CAC Treatment 1 1 1 1 1
VC Max Q_max/4 Q_max/4 Q_max/4 Q_max/4 cr/200ms
VC CLPhi 75 75 75 75 75
VC CLPlo 30 30 30 30 30
VC EPD 90 90 90 90 90
VC EFCI 60 60 60 60 30
VC discard selection 0 0 0 0 0
VS/VD/FCES - - - - 0