Cisco BPX 8650, Installation And Configuration Manual

Page: 414 / 606

23-34
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 23 Configuring BXM Virtual Switch Interface
Class of Service Templates and Qbins
VC Descriptor Parameters
If not already preconfigured, the connection parameters list the range of values that may be configured
as described in Table 23-13.
Every Service Class does not include all parameters. For example, a CBR service type have fewer
parameters than an ABR service type.
Note Not every Service Class has a value defined for every parameter listed in Table 23-13.
ADTF - - - - 500
RDF - - - - 16
RIF - - - - 16
NRM - - - - 32
TRM - - - - 0
CDF - - - - 16
TBE - - - - 16777215
FRTT - - - - 0
Table 23-12 MPLS Service Types (continued)
Parameter CoS 0/4 CoS 1/5 CoS 2/6 CoS3/7 Tag-ABR
Table 23-13 Connection Parameter Descriptions and Ranges
Object Name Range/Values Template Units
Qbin Number 10–15 Qbin #
Scaling Class 0–3 enumeration
CDVT 0–5M (5 sec) secs
MBS 1–5M cells
ICR MCR–PCR cells
MCR 50–LR cells
SCR MCR–LineRate cells
UPC Enable 0–Disable GCRAs
1–Enabled GCRAs
2–Enable GCRA #1
3–Enable GCRA #2
enumeration
UPC CLP Selection 0 – Bk 1: CLP (0+1)
Bk 2: CLP (0)
1 – Bk 1: CLP (0+1)
Bk 2: CLP (0+1)
2–Bk 1: CLP (0+1)
Bk 2: Disabled
enumeration