Cisco BPX 8650, Installation And Configuration Manual

Page: 415 / 606

23-35
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 23 Configuring BXM Virtual Switch Interface
Class of Service Templates and Qbins
Qbin Dependencies
Qbin templates deal only with Qbins that are available to VSI partitions, namely 10 through 15. Qbins
10 through 15 are used by VSI on interfaces configured as trunks or ports. The rest of the Qbins are
reserved and configured by Automatic Routing Management.
When you execute a dspsct command, it will give you the default service type, and the Qbin number.
The available Qbin parameters are listed in Table 23-14.
Notice that the Qbins available for VSI are restricted to Qbins 10 to 15 for that interface. All 32 possible
virtual interfaces are provided with 16 Qbins.
Policing Action (GCRA #1) 0–Discard
1–Set CLP bit
2–Set CLP of
untagged cells,
disc. tagged cells
enumeration
Policing Action (GCRA #2) 0–Discard
1–Set CLP bit
2–Set CLP of
untagged cells,
disc. tagged cells
enumeration
VC Max cells
CLP Lo 0 to 100 %Vc Max
CLP Hi 0 to 100 %Vc Max
EFCI 0 to 100 %Vc Max
VC Discard Threshold Selection 0–CLP Hysteresis
1–EPD
enumeration
VS/VD 0: None
1: VS/VD
2: VS/VD with external
Segment
enumeration
Reduced Format ADTF 0 to 7 enumeration
Reduced Format Rate Decrease Factor
(RRDF) 1 to 15 enumeration
Reduced Format Rate Increase Factor (RRIF) 1 to 15 enumeration
Reduced Format Time Between Fwd RM
cells (RTrm) 0 to 7 enumeration
Cut-Off Number of RM Cells (CRM) 1 to 4095 cells
Table 23-13 Connection Parameter Descriptions and Ranges (continued)
Object Name Range/Values Template Units