Cisco BPX 8650, Installation And Configuration Manual

Page: 241 / 606

C H A P T E R
14-1
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
14
Connecting Cables
This chapter explains how to connect trunk and circuit line cables.
Contents of this chapter include:
•
Making T3 or E3 Connections
•
Making a BXM OC-3 or OC-12 Connection
•
Making a BXM T3/E3 Connection
• Setting up the BME OC-12 Port Loop
•
Alarm Output Connections
Before proceeding to this chapter, you should first complete the procedures in:
•
Chapter 13, “Installing the BPX Switch Cards”
and before that, the procedures in either:
•
Chapter 10, “Installing the DC Shelf”
• Chapter 11, “Installing the AC Shelf”
and
•
Chapter 12, “Installing the T3/E3 Cable Management Tray”
and before that, the procedures in either:
•
Chapter 8, “Installation with Cisco Cabinets including 7000 Series Routers”
or
• Chapter 9, “Installation in Customer Cabinet”
Making T3 or E3 Connections
Each LM-3T3 and LM-3E3 line module (BNI back card) provides three ports with a BNC connector each
for the XMT trunk output and for the RCV trunk input.
Each LM-2T3 and LM-2E3 line module provides two ports with a BNC connector each for the XMT line
output and for the RCV line input.