Cisco BPX 8650, Installation And Configuration Manual

Page: 25 / 606

Figures
xxiii
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Figure 9-5 Rear Mounting Brackets, 30 Inch Rear Rail Setback (AC-Powered Systems)
9-5
Figure 10-1 DC Power
10-2
Figure 10-2 DC Power Connections—With Conduit Box
10-3
Figure 10-3 DC Power Connections—Without Conduit Box
10-4
Figure 11-1 Temporary Spacer Bracket and Support Bracket Installation
11-2
Figure 11-2 Power Supply Tray aligned with Temporary Support Brackets and Bar
11-3
Figure 11-3 Removing an Air Intake Grille
11-4
Figure 11-4 Securing AC Power Supply Tray, 30-Inch Rail Setback
11-5
Figure 11-5 Securing an AC Power Supply Tray, 19.86 inch Rear Rail Setback
11-6
Figure 11-6 AC Power Supply Tray with Redundant AC Inputs (view from rear)
11-7
Figure 11-7 Removing an Air Intake Grille
11-8
Figure 11-8 AC Power Supply Installation
11-9
Figure 11-9 AC Power Supply Connections (Dual and Single Versions Shown)
11-10
Figure 11-10 AC Power
11-11
Figure 12-1 Installation of Cable Management Tray Brackets
12-2
Figure 12-2 Sliding Cable Management Tray over Brackets
12-3
Figure 12-3 Cable Management Tray in Lowered Home Position
12-3
Figure 12-4 Cable Management Tray in Raised Position
12-4
Figure 12-5 Installing BXM T3/E3 Cable Bracket
12-5
Figure 12-6 Connecting Cables to T3/E3 Card
12-6
Figure 12-7 T3/E3 SMB Connector Detail
12-6
Figure 12-8 Cables Routed through Cable Management Tray in Lowered Position
12-7
Figure 12-9 Tray Raised with Cables in Place
12-8
Figure 13-1 BPX Shelf (front view)
13-3
Figure 13-2 BPX Shelf (rear view, DC shelf shown)
13-3
Figure 13-3 Removing an Air Intake Grille
13-5
Figure 13-4 Laser Information Label
13-6
Figure 13-5 Installing a Back Card
13-7
Figure 13-6 Card slot and fan fuses, identifying the 19.2 Gpbs backplane
13-8
Figure 13-7 Y-Cable Connection
13-11
Figure 13-8 Y-Cables on Multiple Ports
13-11
Figure 13-9 APS 1:1 Redundancy
13-13
Figure 13-10 APS 1+1 Redundancy
13-13
Figure 13-11 APS Redundant Frame Assembly
13-14
Figure 13-12 BPX Shelf, Rear View
13-15