Cisco BPX 8650, Installation And Configuration Manual

Page: 226 / 606

13-2
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 13 Installing the BPX Switch Cards
Installing the Cards
The following is a summary of the card installation rules for the BPX switch:
Nonredundant Nodes
• Use either a Broadband Controller Card:
BCC-4V
BCC-3-32M
BCC-3-64M, or
BCC-32
in front slot number 7.
•
With a
BCC-4V
BCC-3-32M, or
BCC-3-64M front card,
use a BCC-3-BC back card in back slot number 7,
or
•
With a BCC-32 front card, use a BCC15-BC in back slot number 7.
Redundant Nodes
•
Use two Broadband Controller Cards, a pair of:
BCC-4Vs,
BCC-3-32Ms,
BCC-3-64Ms, or
BCC-32s
in front slot numbers 7 and 8.
•
With:
BCC-4V,
BCC-3-32M, or
BCC-3-64M front cards
use BCC-3-BC back cards in back slot numbers 7 and 8,
or
• With BCC-32 front cards, use BCC15-BC back cards in back slot numbers 7 and 8.
Note
In some cases, it may be possible to operate two of the three types of BCCs with their proper back
cards temporarily for maintenance purposes, such as replacing a failed controller card. Contact Cisco
Customer Service for assistance.
• Place the ASM card in front slot number 15.
•
Place the LM -ASM card in back slot number 15.
•
Place the cards BNI-3T3 or BNI-3E3 in any other front slot than 7, 8, or 15.
•
Place the cards LM -3T3, LM-3E3, 2OC3-SMF, 2OC3-MMF in all back slots with a BNI in the
corresponding front slot.