Cisco BPX 8650, Installation And Configuration Manual

Page: 329 / 606

21-17
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 21 Configuring ATM Connections
ATM Connection Flow
For a new node running software release 9.2.20 or later, the rt-VBR connection class number is 3.
However, an upgraded node will retain existing connection classes. Therefore, it won’t have the rt-VBR
connection class 3.
For nrt-VBR connections in a new node, running 9.2.20, a number of connection classes are
preconfigured, including 2, 4, 5, and 6.
The following is an example of cnfcls 3, for rt-VBR:
pubsbpx1 TN silves:1 BPX 8620 9.2.20 July 16 2000 10:42 PDT
ATM Connection Classes
Class: 3 Type: rt-VBR
PCR(0+1) % Util CDVT(0+1) AAL5 FBTC SCR
4000/4000 100/100 10000/10000 n 4000/4000
MBS Policing
1000/1000 3
Description: "Default rt-VBR 4000 "
This Command: cnfcls atm 3
Enter class type (rt-VBR, nrt-VBR, CBR, UBR, ABRSTD, ABRFST, ATFR, ATFST, ATFT,
ATFTFST, ATFX, ATFXFST):
The following is an example of cnfcls 2, for nrt-VBR:
pubsbpx1 TN silves:1 BPX 8620 9.2.2G July 16 1999 10:42 PDT
ATM Connection Classes
Class: 2 Type: nrt-VBR
PCR(0+1) % Util CDVT(0+1) AAL5 FBTC SCR
1000/1000 100/100 10000/10000 n 1000/1000
MBS Policing
1000/1000 3
Description: "Default nrt-VBR 1000 "
This Command: cnfcls atm 2
Enter class type (rt-VBR, nrt-VBR, CBR, UBR, ABRSTD, ABRFST, ATFR, ATFST, ATFT,
ATFTFST, ATFX, ATFXFST):