Cisco BPX 8650, Installation And Configuration Manual

Page: 28 / 606

Figures
xxvi
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Figure 23-9 Service Template Overview
23-27
Figure 23-10 Service Template and Associated Qbin Selection
23-28
Figure 23-11 VC Merge Example
23-40
Figure 24-1 Typical ATM Hybrid Network using Virtual Trunks
24-3
Figure 24-2 Virtual and Physical Trunks on a BXM
24-4
Figure 24-3 BXM Egress VIrtual Interfaces and Qbins
24-5
Figure 24-4 Virtual Trunks across a Public ATM Network
24-6
Figure 24-5 ATM Virtual Trunk Header Types
24-8
Figure 24-6 Addition of Virtual Trunks Across a Public ATM Network
24-14
Figure 25-1 SONET Section, Line, and Path
25-3
Figure 25-2 APS 1+1 Redundancy
25-4
Figure 25-3 APS 1:1 Redundancy
25-4
Figure 25-4 APS 1+1 Redundancy, Installing APS Back Cards in APS Redundant Backplane
25-6
Figure 25-5 SONET APS 1+1 Detail
25-7
Figure 25-6 SONET APS 1:1 Detail
25-10
Figure 26-1 Replication of a Root Connection into Three Leaves
26-4
Figure 26-2 Example of Traffic, One Root and Two Leaves
26-4
Figure 26-3 Adding Multicasting Connections
26-5
Figure 26-4 Multi-Segment Multicast Connections
26-6
Figure 26-5 Statistics Collection
26-6
Figure 27-1 Automatic Alarm Reporting
27-2
Figure 27-2 OAM Cells
27-13
Figure 27-3 Alarms
27-13
Figure 28-1 Network Loopback Paths
28-7
Figure 29-1 Unlatching the Air Intake Grille
29-3
Figure 29-2 Removing a Line Module
29-4
Figure 29-3 DC Power Entry Module with Conduit Box
29-6
Figure 29-4 AC Power Supply Assembly
29-7
Figure 29-5 Removing Blank Filler Panel (B side shown)
29-8
Figure 29-6 Card Slot and Fan Fuse Locations on System Backplane
29-11
Figure 32-1 Network Application
32-1
Figure 32-2 Front and Rear Panel Features
32-5