Cisco BPX 8650, Installation And Configuration Manual

Page: 366 / 606

21-54
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 21 Configuring ATM Connections
ATM Command List
ATM Command List
The commands used for ATM connection are listed in Table 21-16. For more information, refer to the
Cisco WAN Switching Command Reference, Release 9.3.30 .
Table 21-16 ATM Connection Commands
Name Description
addcon Adds a connection.
clrchstats Clears the channel statistics.
cnfabrparm Configures ABR parameters (applies to BXM).
cnfatmcls Configures the ATM class.
cnfcdparm Configures the channel statistic level on UXM/BXM cards.
cnfcls Configures the class.
cnfcon Configures the connection.
cnfport Configures the port.
cnfportq Configures the port queue.
delcon Deletes the connection.
dnport Downs a port.
dspatmcls Displays the ATM class.
dspchstats Displays the channel statistics.
dspcls Displays the class.
dspcon Displays the connection.
dspconcnf Displays the connection configuration.
dspcons Displays the connections.
dsplmistats Displays the LMI statistics.
dspport Displays the port.
dspportq Displays the port queue.
dspportstats Displays the port statistics.
tstconseg Tests the connection externally with OAM segment loopback cells.
tstdelay Tests the traffic continuity and connection roundtrip delay.
upport Ups the port.