C H A P T E R
6-1
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
6
Installation Overview
This chapter describes an overview of the procedures used for configuration.
Contents of this chapter include:
•
Summary of an Installation Procedure
•
•
Lines, Trunks, and Connection Configuration
The installation tasks introduced here are explained in detail in subsequent chapters.
For a description of the commands used to initially set up a BPX switch, refer to the
Cisco WAN
Switching Command Reference
and
Cisco WAN Switching SuperUser Command Reference.
For additional information on network management and the graphical user interface recommended for
configuring and provisioning, refer to the
Cisco WAN Manager
User’s Guide
.
Summary of an Installation Procedure
This section summarizes the steps of an intstallation.
Step 1
Safety
Step 2
Site Preparation
Step 3
Unpacking
Step 4
Installing shelf in cabinet or rack
Step 5
Installing a Cisco 7200 or 7500 router on a BPX 8650
Step 6
Optional Cable Management Tray
Step 7
Verifying 9.6 or 19.2 Gbps Backplane
Step 8
Upgrading to BCC-4 Cards
Step 9
Installing APS Redundant Frame Assembly and Back Cards
Step 10
Making T3 or E3 Connections
Step 11
Making a BXM OC3 or OC12 Connection
Step 12
Making a BXM T3/E3 Connection
Step 13
Setting up the BME OC-12 Port Loop
Step 14
Alarm Output Connections
Summary of Contents for BPX 8650
