Cisco BPX 8650, Installation And Configuration Manual

Page: 24 / 606

Figures
xxii
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Figure 5-2 BXM-622 Front Panel, Two-Port Card Shown
5-10
Figure 5-3 BXM-155 Front Panel, Eight-Port Card Shown
5-11
Figure 5-4 BXM-T3/E3 Front Panel, 12-Port Card Shown
5-12
Figure 5-5 SMF-622-2, SMFLR-622-2, and SMFXLR-622-2 Back Card
5-13
Figure 5-6 BXM-155-8 Port back card, MMF, SMF, or SMFLR
5-14
Figure 5-7 BPX-STM1-EL-4 Back Card
5-16
Figure 5-8 BPX-T3/E3 Back Card, 12-Port Option Shown
5-18
Figure 5-9 Y-Cabling of SMF-622 Series Back Cards
5-19
Figure 5-10 BXM SMF-155-8R Back Card
5-21
Figure 5-11 BXM APS Redundant Frame Assembly
5-22
Figure 5-12 BXM Access Port Ingress Operation
5-23
Figure 5-13 BXM Port Egress Operation
5-24
Figure 5-14 BXM Trunk Ingress Operation
5-25
Figure 5-15 BXM Trunk Egress Operation
5-26
Figure 7-1 Laser Information Label
7-3
Figure 7-2 Cabinet Mounting Options for the BPX Shelf
7-7
Figure 7-3 BPX Shelf and T-Rail (Open Rack) or Equivalent Mounting Options
7-8
Figure 7-4 Rack Mounting Dimensions, DC Powered Shelf
7-9
Figure 7-5 Rack Mounting Dimensions, AC Powered Shelf
7-10
Figure 7-6 Removing an Air Intake Grille
7-13
Figure 7-7 Temporary Spacer Bar and Support Brackets Installation
7-14
Figure 7-8 BPX Switch Shelf Aligned with Temporary Support Brackets and Bar
7-14
Figure 8-1 Location of DC Power Entry Module(s), Cabinet Rear View
8-2
Figure 8-2 BPX Shelf Aligned with Temporary Support Brackets and Bar
8-3
Figure 8-3 BPX Shelf with Rear Rail Mounting at Setback of 19.86 inches
8-5
Figure 8-4 Rear Mounting Brackets, with 19.86 Inch Rear Rail Setback (DC Systems)
8-6
Figure 8-5 Rear Mounting Brackets, 19.86 Inch Rear Rail Setback (AC-Systems)
8-6
Figure 8-6 Assembly of Router in Router Enclosure
8-8
Figure 8-7 Installing the Router Enclosure Assembly in the Cisco BPX 7650 Cabinet
8-10
Figure 8-8 Installing the Router Enclosure Assembly in a 19-inch Open Rack
8-11
Figure 8-9 Installing the Router Enclosure Assembly in a 23-inch Open Rack
8-12
Figure 9-1 BPX Switch Aligned with Temporary Support Brackets and Spacer Bar
9-2
Figure 9-2 BPX Switch with Rear Rail Mounting at Setback of 30 Inches
9-3
Figure 9-3 Rear Mounting Brackets, Detail
9-4
Figure 9-4 Rear Mounting Brackets, with 30-inch Rear Rail Setback (DC Systems)
9-4