Chevrolet silverado 2012 Owner'S Manual Download Page 49

Page: 49 / 608

Black plate (3,1)

Chevrolet Silverado Owner Manual - 2012

Keys, Doors, and Windows

2-3

If there is a decrease in the RKE
operating range:

Check the distance. The
transmitter may be too far from
the vehicle.

Check the location. Other
vehicles or objects may be
blocking the signal.

Check the transmitter's battery.
See

“

Battery Replacement

”

later

in this section.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

The Remote Keyless Entry (RKE)
transmitter functions work up to
60 m (195 ft) away from the vehicle.

There are other conditions which
can affect the performance of the
transmitter. See

Remote Keyless

Entry (RKE) System on page 2

‑

With Remote Start (without

Remote Start Similar)

(Remote Vehicle Start):

For

vehicles with this feature, press

to start the engine from outside the
vehicle using the RKE transmitter.
See

Remote Vehicle Start on

page 2

‑

for additional information.

Summary of Contents for silverado 2012

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands

Chevrolet silverado 2012, Owner'S Manual

Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands