Chevrolet silverado 2012 Owner'S Manual Download Page 518

Page: 518 / 608

Black plate (94,1)

Chevrolet Silverado Owner Manual - 2012

10-94

Vehicle Care

5. Raise the tire part way upward.

Make sure the retainer is seated
in the wheel opening.

6. Raise the tire fully against the

underside of the vehicle by
turning the wheel wrench
clockwise until you hear two
clicks or feel it skip twice. You
cannot overtighten the cable.

7. Make sure the tire is stored

securely. Push, pull (A), and then
try to turn (B) the tire. If the tire
moves, use the wheel wrench to
tighten the cable.

8. Reinstall the spare tire lock,

if the vehicle has one.

To store the jack and jack tools:

A. Wing Nut Retaining Wheel

Blocks

B. Wheel Blocks

C. Wing Nut Retaining Tool Kit

D. Wheel Wrench and Extensions

E. Tool Bag

Jack Mounting Bracket

Summary of Contents for silverado 2012

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands

Chevrolet silverado 2012, Owner'S Manual

Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands