Chevrolet silverado 2012 Owner'S Manual Download Page 63

Page: 63 / 608

Black plate (17,1)

Chevrolet Silverado Owner Manual - 2012

Keys, Doors, and Windows

2-17

Power Mirrors

Crew Cab Premium Trim with

Power Folding Mirrors Shown,

Other Models Similar

1. Press (A) or (B) to select the

driver or passenger side mirror.

2. Press the arrows on the control

pad to move the mirror up,
down, right, or left.

3. Adjust each outside mirror so

that a little of the vehicle and the
area behind it can be seen.

4. Press either (A) or (B) again to

deselect the mirror.

The mirrors may also include a
memory function that works with the
memory seats. See

Memory Seats

on page 3

‑

for more information.

Crew Cab Up

‐

Level Trim without

Power Folding Mirrors

1. Move the selector switch located

above the four-way control pad
to the left or right to choose
either the driver side or
passenger side mirror.

2. Press one of the four arrows

located on the control pad to
move the mirror in the desired
direction.

3. Adjust each outside mirror so

that a little of the vehicle and the
area behind it can be seen.

Keep the selector switch in the
center position when not adjusting
either outside mirror.

Summary of Contents for silverado 2012

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands

Chevrolet silverado 2012, Owner'S Manual

Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands