Chevrolet silverado 2012 Owner'S Manual Download Page 264

Page: 264 / 608

Black plate (36,1)

Chevrolet Silverado Owner Manual - 2012

7-36

Infotainment System

Using the USB Port

Radios with a USB port can control
a USB storage device or an iPod

using the radio buttons and knobs.
See

“

Playing an MP3

”

CD Player

on page 7

‑

CD/DVD Player on

page 7

‑

for information about how

to connect and control a USB
storage device or an iPod.

USB Support

The USB connector is located on
the instrument panel or in the center
console, and uses the USB 2.0
standard.

USB

‐

Supported Devices

USB flash drive

Portable USB hard drive

Fifth generation or later iPod

iPod nano

iPod touch

iPod classic

Not all iPods and USB drives are
compatible with the USB port.

Make sure the iPod has the
latest firmware from Apple

for

proper operation. iPod firmware
can be updated using the latest
iTunes

application. See

www.apple.com/itunes.

For help with identifying the iPod, go
to www.apple.com/support.

Radios that have a USB port can
play .mp3 and .wma files that are
stored on a USB storage device as
well as AAC files that are stored on
an iPod.

USB

‐

Supported File and Folder

Structure

The radio supports:

Up to 700 folders

Up to eight folders in depth

Up to 65,535 files.

Folder and file names up to
64 bytes

Files with an .mp3 or .wma file
extension

AAC files stored on an iPod

FAT16

FAT32

Connecting a USB Storage
Device or iPod

The USB port can be used to
control an iPod or a USB storage
device.

To connect a USB storage device,
connect the device to the USB port
located in the center console or on
the instrument panel.

Summary of Contents for silverado 2012

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands

Chevrolet silverado 2012, Owner'S Manual

Search results

Summary of Contents for silverado 2012

Reviews:

Related manuals for silverado 2012

Brands by name

Popular brands