Chevrolet 1977 10 Series, Repair Manual, Page: 330 / 468

(400)7A-10
OVERHAUL MANUAL
Fig. 7 A - 3 3 C - R e m o v i n g F o rw a rd C lu tc h A s s e m b ly and T u r b in e
S h a ft
Fig. 7A-3 1 C ~Removing Fro nt Seal
Oil Pump and Internal Case Components
Removal
1. If necessary to replace, pry front seal from pump (Fig.
7A-31C).
2. Remove pum p attaching bolts.
3. Install two 3/8"-16 threaded slide ham m er bolts, J-
9539 with weights J-6585-01, into bolt holes in pump body
and remove pum p assembly from case (Fig. 7A-32C). (See
illustration for location of threaded holes.)
4. Remove and discard pump to case seal and gasket.
5. Remove forward clutch assembly and turbine shaft
from transmission (Fig. 7A-33C).
6. Remove forward clutch hub to direct clutch housing
thrust washer, if it did not come out with forward clutch
housing assembly.
7. Remove direct clutch assembly (Fig. 7A-34C).
8. Remove front band assembly (Fig. 7A-35C).
Fig. 7A-32C--Removing Pump Assembly
Fig. 7A-34C -Rem oving Direct Clutch Assembly