Chevrolet 1977 10 Series, Repair Manual, Page: 197 / 468

CARBURETOR 6C-3
ACTUATOR
LINK
Fig. 6 C -5 --A ir H o rn Rem oval
pum p link in same manner.
8. Push down on accelerator pum p and remove actuator
link by rotating until tang on rod aligned with slot on pump
plunger lever. Remove the link.
9. Remove pump assembly from float bowl (Fig. 6C-9).
10. Remove pump return spring and power piston spring
from float bowl (Fig. 6C-9).
11. Remove "T" guide and pum p discharge spring using
needle nose pliers (Fig. 6C-10).
12. Pum p discharge ball and idle tube can be removed
Fig. 6C -7--P um p and P o w e r P isto n A c tu a to r Lever
at the same time by inverting the bowl.
13. Remove main metering jets from bottom of fuel
bowl.
14. Remove float needle seat and gasket using Tool J-
22769.
15. The idle stop solenoid can be removed at this time
if desired.
16. Remove the fuel inlet nut, filter and spring (Fig.
6C-11).
No further disassembly of the float bowl is required.
AC C E LE R A TO R P U M P
Fig. 6C-6~Float Bow l Disassembly Fig. 6C-8--Float Bowl Assem bly