Chevrolet 1977 10 Series, Repair Manual, Page: 309 / 468

AUTOMATIC TRANSMISSION
(350)7A-25
R E T A IN IN G \ l | F O R W A R D CLUTCH
R IN G K A S S | MBLY
PRESSURE PLATE
Fig. 7 A -8 2 B --R e m o v in g F o r w a r d C lu tch Re ta in in g Ring and
Pressure Plate
FORW ARD CLUTCH (FIG. 7A-81B)
Disassembly
1. Remove forward clutch retaining ring and pressure
plate (fig. 7A-82B).
2. Remove face plates, steel separator plates and cushion
spring (fig. 7A-83B).
3. Using tool J-23327, compress piston return seat and
remove retaining ring (fig. 7A-84B).
Fig. 7 A - 8 3 B - -R e m o v in g F o r w a r d C lu tc h, Clu tc h Pack
4. Remove piston return seat and twenty-one (21) clutch
return springs.
NOTE:
On JA and JH models, return springs are
attached to return seat.
5. Remove forward clutch piston assembly.
6. Remove the forward clutch inner and outer piston
seals (fig. 7A-85B).
CLUTCH
PISTON
INNER SEAL
Fig. 7 A-84B-Com pressin g Forward Clutch Piston Return Seat
Fig. 7 A-85B-Rem ovin g Forward Clutch Piston Inner and Outer
Seals