Chevrolet 1977 10 Series, Repair Manual, Page: 33 / 468

AIR CONDITIONING
1B-27
Fig. 7 8 --Insta lling R oto r and B e a rin g Puller Fig. 8 0 -- B e a r in g Sta k e L o c a ti o n s
CLUTCH ROTOR BEARING REPLACEMENT
Removal
1. Perform "Com pressor Clutch R otor and Bearing
Assembly Removal" and remove the pulley rim m ounting
screws as described in Step 2.
2. Place rotor and bearing assembly on blocks (Fig. 81)
and drive bearing out of rotor hub with rotor bearing
remover and rotor assembly installer J-25029. It will not be
necessary to remove the staking at the rear of the rotor hub
to remove the bearing. See Figure 80.
J -25 0 3 1-2
BEARING STAKE LOCATIONS
J -2 5 0 2 9
Fig. 81--Removing Clutch Rotor Bearing
Fig. 7 9 -C lu tc h Coil and Housing Assem bly