Canon 3749B002, On-Screen Manual

Page: 49 / 1086

Advanced Guide Troubleshooting
Contents
> Printing Photos from Printed Photos or Films > Loading the Films > Removing the Films
Removing the Films
Remove the films from the Film Guide, and store the Film Guide onto the Document Cover again.
1.
Open the Document Cover to remove the Film Guide.
2.
Remove the film strip or mount films from the Film Guide.
For the mount films:
After the mount films are removed, reassemble the Film Strip Frame with the Film Guide.
(1)
Align the alignment marks on the Film Strip Frame with the alignment marks
on the Film Guide, and insert the tabs on the leading edge of the Film Strip
Frame into the Film Guide.
(2)
Push down to close the Film Holder completely.
Note
If the Film Holder does not close completely, push the whole Film Holder gently downward
to fit the protrusions in the slots of the Film Guide.
3.
Reattach the Film Guide.
(1)
Reattach the Film Guide behind the FAU Protective Sheet.
Turn over the Film Guide and reattach it.
(2)
Reattach the FAU Protective Sheet with the Film Guide to the Document Cover.
Page 49 of 1086 pages Removing the Films