BENSHAW RediStart MX3 Series, User Manual

Page: 77 / 238

5.2.6 Function Group
69
5 - PARAMETER GROUPS
Group LED Display Parameter Setting Range Units Default Page
FUN 00 Jump Code Jump to Parameter 1 to 24 1 125
FUN 01 P71 Meter 1 Meter 1
Ave Current
L1 Current
L2 Current
L3 Current
Curr Imbal
Ground Fault
Ave Volts
L1-L2 Volts
L2-L3 Volts
L3-L1 Volts
Overload
Power Factor
Watts
VA
vars
kW hours
MW hours
Phase Order
Line Freq
Analog Input
Analog Output
Run Days
Run Hours
Starts
TruTorque %
Power %
Pk Accel Cur
Last Start T
Zero Seq GF
Stator Temp
Bearing Temp
Other Temp
All Temp
Ave Current
125
FUN 02
Meter 2 Meter 2 Ave Volts
FUN 03 P78 CT Ratio CT Ratio
72:1, 96:1, 144:1,
288:1, 864:1, 2640:1,
3900:1, 5760:1,
8000:1, 14400:1,
28800:1, 50:5, 150:5,
250:5, 800:5, 2000:5,
5000:5
288:1 126
FUN 04 P77 Phase Order Input Phase Sensitivity
Insensitive
ABC
CBA
Single Phase
Insens. 126
FUN 05 P76 Rated Volts Rated RMS Voltage
100, 110, 120, 200,
208, 220, 230, 240,
350, 380, 400, 415,
440, 460, 480, 500,
525, 575, 600, 660,
690, 800, 1000, 1140,
2200, 2300, 2400,
3300, 4160, 4600,
4800, 6000, 6600,
6900, 10.00K, 11.00K,
11.50K, 12.00K
12.47K, 13.20K,
13.80K
RMS
Voltage
480 126
FUN 06 P75 Motor PF Motor Rated Power Factor
-0.01 (Lag) to 1.00
(Unity)
-0.92 127
FUN 07 P74 Starter Type Starter Type
Normal
Inside Delta
Wye-Delta
Phase Ctl
Curr Follow
ATL
Normal 128
FUN 08 P73 Heater Level Heater Level Off, 1 to 40 %FLA Off 128