BENSHAW RediStart MX3 Series, User Manual

Page: 213 / 238

Fault Codes
205
APPENDIX C - FAULT CODES
Fault Code Description Controlled Fault Stop Shunt Trip Fault Auto-Reset Allowed
F00 No fault - - -
F01 UTS Time Limit Expired Y N Y
F02 Motor Thermal Overload Trip Y N Y
F03 Slow Speed Time Limit Expired N N N
F04 Speed Switch Time Limit Expired Y N Y
F05 Motor PTC Overtemperature Y N Y
F06 Stator RTD Overtemperature Y N Y
F07 Bearing RTD Overtemperature Y N Y
F08 Other RTD Overtemperature Y N Y
F10 Phase Rotation Error, not ABC N N Y
F11 Phase Rotation Error, not CBA N N Y
F12 Low Line Frequency N N Y
F13 High Line Frequency N N Y
F14 Input power not single phase N N Y
F15 Input power not three phase N N Y
F21 Low Line L1-L2 Y N Y
F22 Low Line L2-L3 Y N Y
F23 Low Line L3-L1 Y N Y
F24 High Line L1-L2 Y N Y
F25 High Line L2-L3 Y N Y
F26 High Line L3-L1 Y N Y
F27 Phase Loss N N Y
F28 No Line N N Y
F29 PORT Timeout N N Y
F30 Instantaneous over current (I.O.C.) N Y N
F31 Overcurrent Y N Y
F34 Undercurrent Y N Y
F35 Power Factor Leading Y N Y
F36 Power Factor Lagging Y N Y
F37 Current Imbalance Y N Y
F38 Ground Fault N Y Y
F39 No Current at Run N N Y
F40 Shorted / Open SCR N Y N
F41 Current at Stop N Y N
F46 Disconnect Fault N Y N
F47 Stack Overtemperature / P.S Failure N N Y
F48 Bypass/2M Contactor Fault Y N N
F49 Inline Contactor Fault Y N N
F50 Control Power Low N N Y
F51 Current Sensor Offset Error N Y N
F53 Tachometer Signal Loss Y N N
F54 BIST Fault N N N
F55 BIST CT Fault N N N
F56 RTD Open or Shorted Y N N
F60 External Fault on DI 1 Input N N Y
F61 External Fault on DI 2 Input N N Y
F62 External Fault on DI 3 Input N N Y
F63 External Fault on DI 4 Input Y N Y