BENSHAW RediStart MX3 Series, User Manual

Page: 133 / 238

Jump to Parameter FUN 00
LCD Display
Description By changing the value of this parameter and pressing [ENTER], you can jump directly to any parameter
within the group.
Meter FUN 01, 02
LCD Display
LCD Description
Range Ave Current Average current. (Default Meter 1)
L1 Current Current in phase 1.
L2 Current Current in phase 2.
L3 Current Current in phase 3.
Curr Imbal Current Imbalance %.
Ground Fault Residual Ground Fault % FLA.
Ave Volts Average Voltage L-L RMS.
(Default Meter 2)
L1-L2 Volts Voltage in, L1 to L2 RMS.
L2-L3 Volts Voltage in, L2 to L3 RMS.
L3-L1 Volts Voltage in, L3 to L1 RMS.
Overload Thermal overload in %.
Power Factor Motor power factor.
Watts Motor real power consumed.
VA Motor apparent power consumed.
vars Motor reactive power consumed.
kW hours Kilo-watt-hour used by the motor, wraps at 1,000.
MW hours Mega-watt-hour used by the motor, wraps at 10,000.
Phase Order Phase Rotation.
Line Freq Line Frequency.
Analog In Analog Input %.
Analog Out Analog Output %.
Run Days Running time in days, wraps at 2,730 days.
Run Hours Running time in Hours and Minutes, wraps at 24:00.
Starts Number of Starts, wraps at 65,536.
TruTorque % TruTorque %.
Power % Power %.
Pk accel Curr Peak starting current.
Last Start T Last starting duration.
Zero Seq GF Zero sequence ground fault.
Stator Temp Highest Stator temperature.
Bearing Temp Highest Bearing temperature.
Other Temp Highest Other temperature.
All Temp Highest of all temperatures.
Description
Parameters FUN 01 and FUN 02 configure which meters are displayed on the two lines of the main display
screen.
125
6 - PARAMETER DESCRIPTION
FUN: Meter 2
02 Ave Volts
FUN: Meter 1
01 Ave Current
FUN: Jump Code
00 1