BENSHAW RediStart MX3 Series, User Manual

Page: 210 / 238

Event Codes
** Event Number 1 through 99 - See starter fault listing for description of faults. The event log will only indicate that a
fault of a given fault code occurred and a time stamp when it occurred.
Event Number Event Event Number Event
1 through 99 ** Starter Faults 170 PORT Entered due to low voltage
171 PORT Entered due to low current
101 Start Commanded 172 PORT Bypass contactor opened
102 Slow Speed Commanded 173 PORT Power returned
103 System UTS 174 PORT Recovery complete
104 Energy Saver Entered
105 Energy Saver Exited 180 Parameter Defaults Loaded
106 System Stop Commanded 181 Time Set / Changed
107 System Stop Complete 182 User Passcode Enabled
183 User Passcode Disabled
110 Motor OL Warning 184 Factory Control Password Accessed
111 Motor OL Lockout Activated 185 Event Log Cleared
112 Motor OL Lockout Expired 186 User Run Time Reset
113 Stack OL Warning 187 User KWh meters Reset
114 Stack OL Lockout Activated 188 Reflash Mode Entered
115 Stack OL Lockout Expired 190 System Powered Up
116 Emergency OL Reset Performed 191 System Powered Down
117 RTD Stator Warning 192
Low Control Power Detected when
Stopped
118 RTD Bearing Warning 193 Standard BIST Entered
119 RTD Other Warning 194 Powered BIST Entered
195 BIST Passed
140 Disconnect Opened
141 Disconnect Closed
202
APPENDIX A - EVENT CODES