Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 223 / 342

BVS ID-M1280xF1-xx-xxx
english 49
•
•
•
•
•
•
Value
(dez) Value
(hex) Bit Name Description Reset to binary "0"
32 20 00 5 Ready This bit signals that BVS ID is currently
ready. It is reset while BVS ID performs an
administrative task that prevents it from
processing commands. The bit is
particularly reset
during the startup of BVS ID including
the load of the inspection,
during the change of an inspection
program by means of the web interface
or the TCP/UDP communication
interface,
while the user resides in the
configuration mode,
during Auto Setup,
if the File Device is selected as Image
source in the Inputs tab of the
configuration mode page, or
the System error is set.
BVS ID is not considered to be busy
during the execution of an inspection, and
the
Ready bit will be set. For sequence
control during an inspection run, the bit
Waiting For Trigger is provided.
Automatically, as
soon as the
BVS ID
performs an
administrative task.
256 00 01 8 Trigger
Overflow This bit signals that a trigger has been
received while
BVS ID was not waiting for
a trigger, i.e. while the bit Waiting For
Trigger was binary "0". The behaviour upon
such an unexpected trigger is undefined:
the trigger might cause an image
acquisition or it might not.
By the user with the
command
Reset
errors (0x16) and
automatically during
change to
configuration mode.
1024 00 04 10 Report
Error This bit becomes active as soon as a
report file could not be transferred and got
lost. By the user with the
command
Reset
errors (0x16) and
automatically during
change to
configuration mode.
4096 00 10 12 Input Data
Error It is set for input container overflow (more
input containers than inspection results, so
that one input container was discarded or if
received reference value is too large at the
time of execution of tool
"Inputs" ) or
underflow (more inspection results than
input containers, so that one input
container was used multiple times or if the
received reference value is too small at the
time of execution of tool
"Inputs" ).
By the user with the
command
Reset
errors (0x16) and
automatically during
change to
configuration mode.