Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 197 / 342

BVS ID-M1280xF1-xx-xxx
english 23
•
•
Sensor Device
Task
Used for selecting the sensor and setting sensor parameters.
Parameters
Parameters Description Dat
a
type
Image source Selection of an image source. The simulation ("Image Files") can be used to
display and process stored images.
Trigger mode Continuous - no external triggering active. The sensor captures image in free-
run mode.
Rising Edge - acquires images, if a low->high transition takes place on the
input.
Flash enabled Activates the digital flash output. Boo
l
Trigger signals are discarded as soon as no image can be captured
internally.
In this case, a "Trigger Overflow" signal is generated in the product
status.
NOTE
