Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 324 / 342

BVS ID-M1280xF1-xx-xxx
150 english
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
Humidity 0x0
05C
(92) 0 R 9
byte
s n/a
Humidity Bad 1 R 1
byte BOOL n/a -
Operating Hours
At Exceedance 2 R 4
byte
s UINT32 n/a -
Temperature At
Exceedance 3 R 4
byte
s INT32 n/a -
Humidity Bad
The status of the humidity is displayed as a Boolean value. If the value is TRUE, the signal quality is above the
threshold value; if the value is FALSE, the signal quality is below the threshold value. The evaluation includes a
hysteresis for better signal stability.
Operating Hours At Exceedance
The operating hours value at the first exceedance of the threshold value is stored.
Temperature At Exceedance
The temperature value at the first exceedance of the threshold value is stored.
System Commands
For an overview of all System Commands, see chapter "System Commands".
Events
Event
Code Event Type Event – Description – Remedy Device Status
0x8D12
(36114) Warning The defined threshold of the device-internal
humidity was exceeded.
→ Check installation and ambient conditions.
1 – Maintenance-Required
Storage Usage Monitoring
Description
All variable data is stored in a permanent memory on the device. The data is stored in various segments for
different access and usage purposes.
Because the number of write cycles in the permanent memory is limited, the number in each segment is
monitored by a counter.
All data segments are protected with a CRC32 checksum