Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 310 / 342

BVS ID-M1280xF1-xx-xxx
136 english
Command Value Device Action
0xA5 (165) Maintenance Reset – Resets the Custom Boot Cycle Counter with ISDU-index 0x58
subindex 2 to the default value 0.
Voltage and Current Monitoring
Description
The voltage and current module sends messages about over-current, short-circuit, wire breakage, over-voltage
and under-voltage. Over-voltage and under-voltage detection starts a timer. If the timer has expired and the
voltage level has not returned to the normal operating voltage threshold, the module sends out the messages.
The messages include device status, IO-Link events, process data and LED signaling
Mathematics/Algorithm
In SIO mode or in IO-Link mode the threshold for undervoltage is 17 V and for overvoltage is 31 V.
Process Data
Object
ID Name Description Direction
0x0016
(21) Overload / short-
circuit pin 4 TRUE = overload or short-circuit detected at pin
4. Input
0x0016
(22) Overload / short-
circuit pin 2 TRUE = overload or short-circuit detected at pin
2. Input
0x0017
(23) Undervoltage pin 1/3 TRUE = the voltage level at pin 1/3 is below the
threshold value. Input
0x0018
(24) Overvoltage pin 1/3 TRUE = the voltage level at pin 1/3 is above the
threshold value. Input
0x0019
(25) Cable break pin 4 TRUE = cable break detected at pin 4. Input
0x001A
(26) Cable break pin 2 TRUE = cable break detected at pin 2. Input
0x0043
(67) Overload pin 4 TRUE = overload detected at pin 4. Input
0x0044
(68) Overload pin 2 TRUE = overload detected at pin 2. Input
Pin 2 and pin 4 can be the pins at the IO-Link port or at the I/O port.