Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 315 / 342

BVS ID-M1280xF1-xx-xxx
english 141
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
Lifetime Minimum
Device
Temperature 4 R 2
byte
s INT16 n/a
Lifetime Maximum
Device
Temperature 5 R 2
byte
s INT16 n/a
Device
Temperature
Alarm
Configuration 0x00
53
(83) 0 R/W 4
byte
s INT16 Yes
Lower Alarm
Level Device
Temperature 1 R/W 2
byte
s INT16 No -25
Upper Alarm Level
Device
Temperature 2 R/W 2
byte
s INT16 No 85
Device Temperature
Device Temperature contains information about the device temperature (current value in °C), the minimum or
maximum device temperature since the last time the device was switched on/reset (in °C) and minimum or
maximum device temperature during the lifetime of the
BVS ID (in °C).
Device Temperature Alarm Configuration
Setting for the lower threshold value (in °C) for the device temperature warning (0x8D20) and upper threshold
value (in °C) for the device temperature warning (0x8D10).
Events
Event
Code Event Type Event – Description – Remedy Device Status
0x4000
(16384) Error Temperature Fault – Overload – The BVS ID is
operated outside of the device-specific
temperature limits. Risk of device damage.
4 – Failure
0x4210
(16912) Warning Device Temperature Overrun – Clear Heat Of
Source – Risk of device damage. The
BVS ID is
too hot.
→ Remove heat source, provide the BVS ID e
with heat insulation if necessary.
2 – Out-of-Specification
0x4220
(16928) Warning Device Temperature Underrun – Insulate Device –
Risk of device damage. The
BVS ID is too cold.
→ Insulate the BVS ID .
2 – Out-of-Specification