Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 202 / 342

BVS ID-M1280xF1-xx-xxx
28 english
General settings
Task
Hier werden die allgemeinen Einstellungen für das Tool vorgegeben.
Parameters
Source of the expected
value Specifies the source of the expected value.
Find Text The included value of all read codes are compared with
the expected value. The image analysis is successful if
at least one code is found containing the expected
value.
You can use characters such as ? and * as wild cards.
Thus, an expected value of 17* can be used to ensure
that the read value begins with 17. The initial parameter
"*" accepts any codes.
String
Expected number of codes The maximum number of codes to be found during
image analysis. Int
Minimum number of codes The minimum number of codes to be present in the
image. If the found number of codes falls below the
given minimum number of codes, the image analysis
reports an error.
If this parameter is used in conjunction with an
expected value, ensure that the expected
number of codes matches the total amount of
possible codes in the image. Otherwise, it is
possible that the code retrieval is stopped
before the code is found which contains the
expected value.
HINWEIS
