Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 256 / 342

BVS ID-M1280xF1-xx-xxx
82 english
•
•
•
Structure protocol byte 0 (BVS ID → PLC) State Bytes
Name Status code Meaning
OK 00
hex
Command was successfully executed.
OK Inspection ID 02
hex
Response to the command Get Inspection ID;
transfer of the
inspection ID.
OK Results 03
hex
Response to the command Get Results; transfer
of results.
OK Date Time 06
hex
Response to the command Get Date Time;
transfer of timestamp.
NOK Error 10
hex
An error occurred during the last transfer of a
command.
NOK Communication Abort 11
hex
Communication was canceled by the PLC by
resetting the
Job bit.
NOK Invalid Command 13
hex
An invalid command code was transferred.
NOK Results 15
hex
Response to the command Get Results; no
results present.
NOK Busy 16
hex
Command could not be executed since the
camera is still processing another command or
is not yet ready after a restart.
NOK Inspection Error 1A
hex
An error occured while loading the inspection
program.
Positive results ( OK .... ) are signalled with the Job End bit during the handshake.
Negative results ( NOK ... ) are signalled with the Job Error bit during the handshake.
Negative results ( NOK... ) have no payload and always a length of 0.