Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 329 / 342

BVS ID-M1280xF1-xx-xxx
english 155
Value Diagnosis Level Descriptions
3 No events All diagnosis messages from the BVS ID are
suppressed.
Events
For an event overview, see chapter "Events".
Event Code Suppression
This parameter indicates the currently suppressed event messages. The user can access the individual
messages via subindex 0 or a specific subindex. This index is part of the data storage and is stored in non-
volatile memory.
Value 0x0000 (0) is the default value and is interpreted as FREE.
Each event message is structured as follows::
Byte1 (MSB) Byte0 (LSB)
Event Code High Byte Event Code Low Byte
Event Code Suppression Teach-in/Delete
To add an event to the list of suppressed events, the event code is inserted in subindex 0 in Event Code
Suppression Teach-In. It is added to the next free place in the table.
If the event code is deleted with Event Code Suppression Delete, it is removed from the list.
Reset Commands
BVS ID
The device supports various reset commands for resetting the set parameters to default values. Each of these
commands is accessed by means of System Commands.
This function is defined in the IO-Link specification and is implemented according to Version 1.1.2.
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
System
Commands 0x0
002
(2) 0 W 1
byte UINT8 n/a -
System Commands
Command Value Device Action
0x80 (128) Device Reset – Device Reset means a warm start of the BVS ID . During this
process, the
microcontrollers are restarted and all initializations performed again without any
change made to the parameter values.