Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 296 / 342

BVS ID-M1280xF1-xx-xxx
122 english
Device Discovery
Description
With the Device Discovery function, an IO-Link device can be found again by starting signaling on the LED of the
device by means of a system command.
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
Device Discovery
Timeout 0x0
0FE
(254
) 0 R/
W 2
byte
s UINT16 Yes 1
Device Discovery Timeout
The Device Discovery Timeout parameter sets the duration of the Device Discovery signal that is displayed via
LEDs. The value is specified minutes. The value range from 0 to 30 minutes is allowed. If the parameter is set to
0, the Device Discovery signal is deactivated. The parameter is reset by Application Reset and Factory Reset,
see chapter "Reset Commands".
System Commands
Command Value Device Action
0xAF (175) Start Device Discovery
Network Settings
Description
With the network setting the IP configuration can be set and read.
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
Network Settings 0x0
0BE
(190
) 0 R/
W 46
byte
s No
IP Address 1 R/
W ≤ 15
byte
s STRING No
Subnet Mask 2 R/
W ≤ 15
byte
s STRING No