Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 340 / 342

BVS ID-M1280xF1-xx-xxx
166 english
•
•
•
•
•
Product Status Signals
Topic Bedeutung Example
/vision/status Returns the list of status information entries
defined below.
/vision/status/ready Is set to false, if BVS ID is currently busy, and
cannot process any messages or signals at this
moment.
{"ready":false}
/vision/status/
simulationMode This topic signals that either the File Device or
the Simulation mode in the Communication
Settings of the System Settings is active.
{"simulationMode": fals
e}
/vision/status/
triggerOverflow A trigger was discarded since it was still busy
with the analysis of the previous image.
{"triggerOverflow": fal
se}
/vision/status/
waitingForTrigger True if BVS ID is waiting for a trigger signal.
{"waitingForTrigger": t
rue}
/vision/status/
inputDataError It is set for input buffer (container) overflow
(more input containers than inspections, so
that one input container was discarded).
It is set for input buffer (container) underflow
(more inspections than input containers, so
that one input container was used multiple
times).
{"inputDataError":false
}
/vision/status/
resultDataError This topic becomes true as soon as a result
container was not picked up by the REST client.
{"resultDataError": fal
se}
/vision/status/
reportError This topic becomes true as soon as a report file
could not be transferred and got lost.
{"reportError": false}
/vision/status/
systemError This topic becomes true if
A critical temperature of 90 °C was exceeded
inside the device.
The inspection program could not be
imported. instead the standard inspection
program is set.
A critical error occurred while executing the
inspection program.
{"systemError":false}