Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 228 / 342

BVS ID-M1280xF1-xx-xxx
54 english
•
•
Das 0th bit of the high byte, which indicated Trigger Error is being reset to binary "0". The 4th bit of the low byte,
which indicates Ready is unaffected by the reset.
Get inspection ID
Gets the program number of the active inspection.
Length in bytes Structure Value Description
2 UINT16 30
hex
Message ID
2 UINT16 00
hex
User data length in bytes
BVS ID answers with a response message containing the Inspection ID.
Length in bytes Structure Value Description
2 UINT16 30
hex
Message ID
2 UINT16 04
hex
User data length in bytes
2 UNIT16 Result code
2 UINT16 if OK Inspection ID: the set
Inspection ID
if NOK Busy: the constant value of
0
Example:
Message from the client to BVS ID : 30 00 00 00
BVS ID responds to it with: 30 00 04 00 02 00 15 00
The last 2 bytes representing the Inspection ID (15 00) is interpreted as 21 in decimal system.
Set inspection ID
Sets the ID of the active inspection, which triggers a change to the inspection with the given ID.
Length in bytes Structure Value Description
2 UINT16 31
hex
Message ID
2 UINT16 02
hex
User data length in bytes
2 UINT16 Inspection ID
BVS ID answers with a response message containing the program ID which was sent and an error code which
signals whether the change was successful.
Length in bytes Structure Value Description
2 UINT16 31
hex
Message ID