Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 221 / 342

BVS ID-M1280xF1-xx-xxx
english 47
The response to an action message contains a result code that informs about the success of the request. This
result code is contained in the first word of the user data. The result code can have the following values:
Name Stat
e
cod
e Meaning
OK 00
hex
Command was successfully executed.
OK
Inspection
ID 02
hex
Response to the command "Get inspection ID"; transfer of the inspection ID.
OK Date
Time 06
hex
Response to the command "Get date and time"; transfer of timestamp.
NOK Error 10
hex
An error occurred during the last transfer or execution of a command. A malformed
command (e.g. wrong length) is a possible reason.
NOK Invalid
Command 13
hex
An invalid command code was transferred.
NOK Busy 16
hex
Command could not be executed since the status Ready is not set. Possible reasons
for the Ready not to be set are listed in the section
Status message .
NOK
Inspection
Error 1A
hex
The inspection program could not be changed. Possible reasons for the inspection
program change to fail are listed in the section
Set inspection ID .
It is not guaranteed that an interrupted network connection via TCP is detected promptly. For this
reason, a watchdog functionality is recommended, which checks the connection in a defined time
interval. For this, you can request the status message. You can also use "Get Inspection ID", which
responds with the ID of the current inspection.
NOTE
