Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 179 / 342

BVS ID-M1280xF1-xx-xxx
english 5
1.2.6 Character encoding
General remarks
Strings, provided during the configuration of the BVS ID sensor, must be given in their UTF-8 encoding,
respectively. Note, that t
he first 128 characters of the Unicode character set are equivalent to ASCII, that is, an
ASCII encoded text and its UTF-8 encoding provide the same binary representation. If the user-defined string
consists of ASCII values smaller than 128 only, these strings are automatically UTF-8 encoded by definition.
1.2.7 Representation of UTF-8 encoded strings
Characters transmitted in their UTF-8 encoding are set in apostrophes (e.g. 'L').
1.3 Explanation of the warnings
Always observe the warnings in these instructions and the measures described to avoid hazards. The warnings
used here contain various signal words and are structured as follows:
The individual signal words mean:
1.4 Used Technical Terms and Abbreviations
BVS Balluff Vision Solutions
CMOS Complementary metal-oxide-semiconductor
DHCP Dynamic Host Configuration Protocol
I/O port Digital input and output port
EEPROM Electrical Erasable and Programmable ROM
EMC Electromagnetic compatibility
FCC Federal Communications Commission
GND Ground
HEX Hexadecimal
NOTE
This symbol indicates general notes.

SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
→ Measures to avoid hazards

ATTENTION
Indicates a danger that can lead to damage or destruction of the product.
