Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 299 / 342

BVS ID-M1280xF1-xx-xxx
english 125
Object
ID Name Description Direction
0x0021
(33) Signal Quality
Bad Output of the current signal quality evaluation; TRUE means a
signal quality below the threshold value, FALSE means a signal
quality equal to or above the threshold value Input
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
Low Signal Quality
Threshold 0x0
0CE
(206
) 0 R/
W 1
byte
s UINT8 Yes 0
Signal Quality 0x0
0CF
(207
) 0 R 2
byte
s n/a
Current Signal
Quality 1 R 1
byte UINT8 n/a -
Signal Quality Bad 2 R 1 Bit BOOL n/a -
Low Signal Quality Threshold
The threshold value for low signal quality can be set in order to monitor the current signal quality. It is displayed
as a value between 0 and 100 in percent. If the current signal quality value drops below the signal quality
threshold value, the Low Signal Quality Level warning is output.
The function can be deactivated by setting the threshold value to zero.
Current Signal Quality
The current signal quality is displayed as a value between 0 and 100 in percent. If no valid signal quality is
available, the value is set to 255.
Signal Quality Bad
The status of the signal quality is displayed as a Boolean value. If the value is TRUE, the signal quality is below
the threshold value; if the value is FALSE, the signal quality is equal to or greater than the threshold value. This
status is visualized by an orange LED that illuminates if the value is
TRUE.
System Commands
Command Value Device Action
0x81 (129) Application Reset – Sets the threshold value with ISDU index 0xCE Low Signal
Quality Threshold to default 0. The feature is thereby deactivated and the
evaluation of index 0xCF subindex 2 always results in FALSE.