Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 323 / 342

BVS ID-M1280xF1-xx-xxx
english 149
•
•
•
•
•
Vibration Alarm Threshold
Threshold value of the vibration for triggering an event. The comparison is performed for each axis and variable
with logical OR-link.
The hysteresis is fixed and is based on time (not on amplitude). If the vibration value exceeds the threshold value
for 50 ms, the alarm is activated.
Objective: debouncing and avoidance of shock values.
Unit: [mm/s]
Minimum value: 0,0
Maximum value: 1770,0
Vibration Alarm Status
The status flag is TRUE if the vibration exceeds the alarm threshold value.
0 = no alarm
255 = alarm
Events
Event
Code Event Type Event – Description – Remedy Device Status
0x8CD1
(36049) Warning Vibration alarm
→
Check machine.
0 – Device is operating
properly.
This event indicates that the measured vibration value (v-RMS) exceeds the specified threshold value. The
machine should be inspected, since the vibration value is above the normal value. The status of the
BVS ID
itself is OK, it is functioning properly.
The higher vibration is caused outside of the BVS ID . The primary goal is the detection of trends, changes to
the vibration alarm value (see figure above yellow line).
Humidity
Description
The function monitors the air humidity in the BVS ID and informs of changes through corresponding IO-Link
events. The humidity detection returns an immediate reaction in the event of a critical failure. This reaction is
triggered if the humidity rises above a fixed threshold value and gives the clear if a satisfactory humidity value is
again achieved. The status when the level is exceeded the first time is stored permanently.
Process Data
Object ID Name Description Directio
n
0x0023 (35) Humidity Bad Output of the current humidity evaluation; FALSE
means a humidity below above the threshold value,
TRUE means a humidity value equal to or above
the threshold value. Input