Balluff BVS ID-M1280-F1 Series, Configuration Manual

Page: 292 / 342

BVS ID-M1280xF1-xx-xxx
118 english
4.4.7 Communication parameters
The basic IO-Link specification of BVS ID-M1280BF1-L3-000 is described as follows.
Specification IO-Link Description Value
Transmission rate COM COM3 (230.4
kBaud)
Minimum cycle time of device min cycle time 0x27 (3.9 ms)
Frame specification:
– Amount of Preoperate on demand data required
– Amount of Operate on demand data required
– ISDU M-sequence capability:
– Preoperate M-
sequence type
– Operate M-sequence
type
– ISDU supported 0x1B
2 e.g.
2 e.g.
Supported
IO-Link protocol version Revision ID 0x11 (Version 1.1)
Amount of process data from the device to the master ProcessDataIn 0x9F (32 e.g.)
Amount of process data from the master to the device ProcessDataOut 0x00 (0 Bit)
Manufacturer ID Vendor ID 0x378
Device identification Device ID 0x061001
In order to flexibly adapt the basic communication parameters to the application, other device variants can also
be adjusted.
The following device variants can be selected:
Variant name Device
identifi
cation Transmis
sion rate Minimum
cycle
time of
device Frame
specification
(Number of
Preoperate on
demand data
required /
Number of
Operate on
demand data
required /
ISDU) IO-Link
protocol
version Qty. of process data
from the
device to
the
master from the
master to
the
device
BVS ID-
M1280BF1-
L3-000
(CCM) 0x061
002 COM3
(230.4
kBaud) 0x27 (3.9
ms) 0x1B (2 bytes /
2 bytes /
supported) 0x11
(Version
1.1) 0x9F (32
bytes ) 0x00 (0
Bit)
BVS ID-
M1280BF1-
L3-090 0x061
005