AudioCodes Mediant 3000, User Manual

Page: 603 / 872

Version 6.6 603 Mediant 3000
User's Manual 48. Reporting Information to External Party
48.3 Configuring RADIUS Accounting
The device can send accounting data of SIP calls as call detail records (CDR) to a RADIUS
Accounting server. The device can send the accounting messages to the RADIUS server
upon call release, call connection and release, or call setup and release. For a list of the
CDR attributes, see the table following the procedure below.
Notes:
•
For RADIUS accounting settings to take effect, you must save the
settings to flash memory with a device reset.
•
For a description of the RADIUS accounting parameters, see 'RADIUS
Parameters' on page
680 .

To configure RADIUS accounting:
1. Open the RADIUS Parameters page ( Configuration tab > VoIP menu > SIP
Definitions submenu > RADIUS Parameters Settings ).
Figure 48-3: RADIUS Accounting Parameters Page
2. Configure the parameters as required.
3. Click Submit.
4. For your settings to take effect, reset the device with a flash burn.
The table below describes the RADIUS Accounting CDR attributes included in the
communication packets transmitted between the device and a RADIUS server.
Supported RADIUS Accounting CDR Attributes
Attribute
Number
Attribute
Name
Vendor
Specific
Attribute
(VSA) No.
Purpose
Value
Format
Example AAA
Request Attributes
1 user-name - Account number or
calling party number
or blank String up
to 15
digits
long
542138574
7 Start Acc
Stop Acc
4 nas-ip-
address - IP address of the
requesting device Numeric 192.168.14.
43
Start Acc
Stop Acc
6 service-type - Type of service
requested Numeric 1: login Start Acc
Stop Acc
26 h323-
incoming- 1 SIP call identifier Up to 32
octets
- Start Acc
Stop Acc