AudioCodes Mediant 3000, User Manual

Page: 794 / 872

User's Manual 794 Document #: LTRT-89729
Mediant 3000
Parameter Description
CauseMapISDN2SIP_SipResponse;
[\CauseMapISDN2SIP ]
Where,

IsdnReleaseCause = Q.850 Release Cause

SipResponse = SIP Response
For example:
CauseMapISDN2SIP 0 = 50,480;
CauseMapISDN2SIP 0 = 6,406;
When a Release Cause is received (from the PSTN side), the device
searches this mapping table for a match. If the Q.850 Release Cause is
found, the SIP response assigned to it is sent to the IP side. If no match
is found, the default static mapping is used.
Note: This parameter can appear up to 12 times.
Release Cause Mapping from SIP to ISDN Table
Web: Release Cause
Mapping Table
EMS: SIP to ISDN
Cause Mapping
[CauseMapSIP2ISDN]
This table parameter maps SIP responses to Q.850 Release Causes.
The format of this parameter is as follows:
[CauseMapSIP2ISDN]
FORMAT CauseMapSIP2ISDN_Index =
CauseMapSIP2ISDN_SipResponse,
CauseMapSIP2ISDN_IsdnReleaseCause;
[\CauseMapSIP2ISDN ]
Where,

SipResponse = SIP Response

IsdnReleaseCause = Q.850 Release Cause
For example:
CauseMapSIP2ISDN 0 = 480,50;
CauseMapSIP2ISDN 0 = 404,3;
When a SIP response is received (from the IP side), the device
searches this mapping table for a match. If the SIP response is found,
the Q.850 Release Cause assigned to it is sent to the PSTN. If no
match is found, the default static mapping is used.
Note: This parameter can appear up to 12 times.
Web/EMS: Enable
Calling Party Category
[EnableCallingPartyCat
egory]
Determines whether Calling Party Category (CPC) is mapped between
SIP and PRI.

[0] Disable = (Default) Don't relay the CPC between SIP and PRI.

[1] Enable = The CPC is relayed between SIP and PRI.
If enabled, the CPC received in the Originating Line Information (OLI) IE
of an incoming ISDN Setup message is relayed to the From/P-Asserted-
Identity headers using the 'cpc' parameter in the outgoing INVITE
message, and vice versa.
For example (calling party is a payphone):
From:<sip:2000;cpc=payphone@10.8.23.70>;tag=1c18061
57451
Note: This feature is applicable only to the NI-2 PRI variant.
[UserToUserHeaderFor
mat]
Defines the interworking between the SIP INVITE's User-to-User header
and the ISDN User-to-User (UU) IE data.

[0] = (Default) SIP header format: X-UserToUser.

[1] = SIP header format: User-to-User with Protocol Discriminator
(pd) attribute (according to IETF Internet-Draft draft-johnston-
sipping-cc-uui-04). For example: