AudioCodes Mediant 3000, User Manual

Page: 231 / 872

Version 6.6 231 Mediant 3000
User's Manual 16. Control Network
Notes:
•
IP Group ID 0 cannot be used. This IP Group is set to default values and
is used by the device when IP Groups are not implemented.
•
When operating with multiple IP Groups, the default Proxy server must
not be used (i.e., the parameter IsProxyUsed must be set to 0).
•
If different SRDs are configured in the IP Group and Proxy Set tables,
the SRD defined for the Proxy Set takes precedence.
•
You can also configure the IP Groups table using the table ini file
parameter, IPGroup (see 'Configuration Parameters Reference' on page
643 ).

To configure IP Groups:
1. Open the IP Group Table page ( Configuration tab > VoIP menu > Control Network
submenu > IP Group Table ).
2. Click the Add button: the following dialog box appears:
Figure 16-2: IP Group Table - Add Dialog Box
3. Configure the IP Group parameters according to the table below.
4. Click Submit .
5. To save the changes to flash memory, see 'Saving Configuration' on page 520 .
IP Group Parameters
Parameter Description
Common Parameters
Type
[IPGroup_Type] Defines the type of IP Group:

[0] Server = Used when the destination address, configured by the
Proxy Set, of the IP Group (e.g., ITSP, Proxy, IP-PBX, or Application
server) is known.

[1] User = Represents a group of users such as IP phones and
softphones where their location is dynamically obtained by the device
when REGISTER requests and responses traverse (or are
terminated) by the device. These users are considered remote (far-