AudioCodes Mediant 3000, User Manual

Page: 856 / 872

User's Manual 856 Document #: LTRT-89729
Mediant 3000
53.18 Automatic Update Parameters
The automatic update of software and configuration files parameters are described in the
table below.
Note: Auxiliary file upload through TFTP is not supported by HA mode.
Automatic Update of Software and Configuration Files Parameters
Parameter Description
General Automatic Update Parameters
[AutoUpdateCmpFile] Enables the Automatic Update mechanism for the cmp file.

[0] = (Default) The Automatic Update mechanism doesn't apply to
the cmp file.

[1] = The Automatic Update mechanism includes the cmp file.
Note: For this parameter to take effect, a device reset is required.
[AutoUpdateFrequency
] Defines the number of minutes that the device waits between automatic
updates. The default is 0 (i.e., the update at fixed intervals mechanism
is disabled).
Note: For this parameter to take effect, a device reset is required.
[AutoUpdatePredefined
Time] Defines schedules (time of day) for automatic updates. The format of
this parameter is: 'HH:MM', where
HH denotes the hour and MM the
minutes, for example, 20:18.
Notes:

For this parameter to take effect, a device reset is required.

The actual update time is randomized by five minutes to reduce the
load on the Web servers.
EMS: AUPD Verify
Certificates
[AUPDVerifyCertificate
s]
Determines whether the Automatic Update mechanism verifies server
certificates when using HTTPS.

[0] = Disable (default)

[1] = Enable
[AUPDCheckIfIniChang
ed] Determines whether the Automatic Update mechanism performs CRC
checking to determine if the
ini file has changed prior to processing.

[0] = (Default) Do not check CRC. The ini file is loaded whenever the
server provides it.

[1] = Check CRC for the entire file. Any change, including line order,
causes the ini file to be re-processed.

[2] = Check CRC for individual lines. Use this option when the HTTP
server scrambles the order of lines in the provided ini file.
[ResetNow] Invokes an immediate device reset. This option can be used to activate
offline (i.e., not on-the-fly) parameters that are loaded using the
parameter IniFileUrl.

[0] = (Default) The immediate restart mechanism is disabled.

[1] = The device immediately resets after an ini file with this
parameter set to 1 is loaded.