AudioCodes Mediant 3000, User Manual

Page: 124 / 872

User's Manual 124 Document #: LTRT-89729
Mediant 3000
11.3.4 Networking Configuration Examples
This section provides configuration examples of networking interfaces.
11.3.4.1 One VoIP Interface for All Applications
This example describes the configuration of a single VoIP interface for all applications:
1. Multiple Interface table: Configured with a single interface for OAMP, Media and
Control:
Example of Single VoIP Interface in Multiple Interface Table
Index
Applicati
on Type
Interfac
e Mode
IP
Address
Prefix
Lengt
h
Default
VLA
N ID Interface
Name
Primary /
Secondary
DNS
Server IP
Address
0 OAMP,
Media &
Control
IPv4 192.168.85
.14
16 192.168.
0.1
1 myInterface -
2. VLANS are not required and the Native VLAN ID is irrelevant. Class of Service
parameters may have default values.
3. IP Routing table: Two routes are configured for directing traffic for subnet
201.201.0.0/16 to 192.168.0.2, and all traffic for subnet 202.202.0.0/16 to 192.168.0.3:
Example of IP Routing Table
Destination IP
Address
Prefix Length
Gateway IP
Address
Metric Interface Name
201.201.0.0 16 192.168.0.2 1 -
202.202.0.0 16 192.168.0.3 1 -
4. The NTP applications remain with their default application types.
11.3.4.2 VoIP Interface per Application Type
This example describes the configuration of three VoIP interfaces; one for each application
type:
1. Multiple Interface table: Configured with three interfaces, each for a different
application type, i.e., one for OAMP, one for Call Control, and one for RTP Media, and
each with a different VLAN ID and default gateway:
Example of VoIP Interfaces per Application Type in Multiple Interface Table
Index
Application
Type
Interface
Mode
IP Address
Prefix
Length
Gateway
VLAN
ID
Interface
Name
0 OAMP IPv4
Manual
192.168.85.14 16 0.0.0.0 1 ManagementI
F
1 Control IPv4
Manual
200.200.85.14 24 200.200.85.1 200 myControlIF
2 Media IPv4
Manual
211.211.85.14 24 211.211.85.1 211 myMediaIF