AudioCodes Mediant 3000, User Manual

Page: 34 / 872

User's Manual 34 Document #: LTRT-89729
Mediant 3000
3. At the prompt, type the following command to access the configuration folder, and
then press Enter:
conf
4. At the prompt, type the following command to view the current network settings, and
then press Enter:
GCP IP
5. At the prompt, typing the following command to change the network settings, and then
press Enter:
SCP IP <ip_address> <subnet_mask> <default_gateway>
You must enter all three network parameters, each separated by a space, for
example:
SCP IP 10.13.77.7 255.255.0.0 10.13.0.1
6. At the prompt, type the following command to save the settings and reset the device,
and then press Enter:
SAR
7. For HA mode, repeat the above steps for the second blade.
2.4 Assigning an IP Address for Mediant 3000 HA
This section describes how to assign IP addresses to the Mediant 3000 High Availability
(HA) device. This can be done using one of the following tools:

BootP and the Web interface - see 'Web Interface' on page 35

AudioCodes EMS management tool - see 'EMS' on page 36
The Mediant 3000 HA houses two TP-6310 blades or two TP-8410 blades, where one is
active while the other is redundant (or in standby). Each of these two blades has a different
private IP address, which is used for initial configuration, maintenance, or fallback in case
of a major device problem which prevents it from operating in HA mode. When initially
configuring the blades, the BootP server communicates with the blades using these two IP
addresses.
In addition to the private IP addresses, the device has "global" (public) IP addresses used
by the active blade for communicating with the IP network (i.e., OAMP, Media, and Control
interfaces). These global IP addresses can be configured using the ini file, Web, or EMS
management tools. From the perspective of the WAN interface (e.g., proxy server), the two
blades have the same IP address (global IP address) and the redundant blade is a
transparent entity.
Default IP Addresses for Mediant 3000 HA
Parameter Default Value
Private IP Addresses

Blade in Slot 1: 10.1.10.10

Blade in Slot 3: 10.1.10.11
Subnet Mask 255.255.0.0
Global IP Address 0.0.0.0