AudioCodes Mediant 3000, User Manual

Page: 643 / 872

Version 6.6 643 Mediant 3000
User's Manual 53. Configuration Parameters Reference
53 Configuration Parameters Reference
The device's configuration parameters, default values, and their descriptions are
documented in this section.
Note: Parameters and values enclosed in square brackets [...] represent the ini file
parameters and their enumeration values.
53.1 Networking Parameters
This subsection describes the device's networking parameters.
53.1.1 Ethernet Parameters
The Ethernet parameters are described in the table below.
Ethernet Parameters
Parameter Description
EMS: Physical
Configuration
[EthernetPhyConfigurati
on]
Defines the Ethernet connection mode type.

[0] = 10Base-T half-duplex (Not applicable)

[1] = 10Base-T full-duplex

[2] = 100Base-TX half-duplex (Not applicable)

[3] = 100Base-TX full-duplex

[4] = (Default) Auto-negotiate

[6] = 1000Base-TX half-duplex (Not applicable)

[7] = 1000Base-TX full-duplex
Note: For this parameter to take effect, a device reset is required.
53.1.2 Multiple VoIP Network Interfaces and VLAN Parameters
The IP network interfaces and VLAN parameters are described in the table below.
IP Network Interfaces and VLAN Parameters
Parameter Description
Multiple Interface Table
Web: Multiple Interface
Table
EMS: IP Interface
Settings
[InterfaceTable]
This table parameter configures the Multiple Interface table. The format
of this parameter is as follows:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingInterface;